Awgn

SCPI Commands

CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:ENABle
CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:SNRatio

class Awgn

Awgn commands group definition. 4 total commands, 1 Sub-groups, 2 group commands

get_enable() → bool

# SCPI: CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:ENABle
value: bool = driver.configure.fading.awgn.get_enable()

Enables or disables AWGN insertion via the fading module. For dual carrier, the same settings are applied to both carriers. Thus it is sufficient to configure one carrier.

return

enable: OFF | ON

get_sn_ratio() → float

# SCPI: CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:SNRatio
value: float = driver.configure.fading.awgn.get_sn_ratio()

Queries the signal to noise ratio for the AWGN inserted via the internal fading module.

return

ratio: Range: -50 dB to 30 dB, Unit: dB

set_enable(enable: bool) → None

# SCPI: CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:ENABle
driver.configure.fading.awgn.set_enable(enable = False)

Enables or disables AWGN insertion via the fading module. For dual carrier, the same settings are applied to both carriers. Thus it is sufficient to configure one carrier.

param enable

OFF | ON

set_sn_ratio(ratio: float) → None

# SCPI: CONFigure:CDMA:SIGNaling<Instance>:FADing:AWGN:SNRatio
driver.configure.fading.awgn.set_sn_ratio(ratio = 1.0)

Queries the signal to noise ratio for the AWGN inserted via the internal fading module.

param ratio

Range: -50 dB to 30 dB, Unit: dB

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.fading.awgn.clone()

Subgroups

• Bandwidth